Rebar Derusting Machine For Sale

---

Product details

Rebar Derusting Machine Principle of Operation:

The steel bar derusting machine is driven by the power switch to run the two motors forward and reverse, and the double descaling assembly is driven to rotate by the V-belt to achieve the derusting effect.

Rebar Derusting Machine Parameter:

Model	ZT-32	ZT-51
Working Range	14-32mm	48/51mm(without traction wheel)|32-51mm(with traction wheel)
Working Speed	580-600r/min	580-600r/min
Power	2.2kw*2 (without traction wheel)|3kw*2(with traction wheel)	3kw*2
Motor	380V	380V
Weight	160kg	220kg
Dimensions	800*500*600mm	800*500*800mm

Rebar Rust Remover Machine Working Principle:

The working principle of the steel bar derusting machine is two rows of steel wire rods/wire wheels(wire wheels for non-polishing machines). The two angles rotate at high speed to remove the rust. The rebar passes quickly in the middle fast.

Rebar Derusting Machine Composition:

The machine consists of 2 electric motors, a double rust removal assembly, double Vientiane bearings, bearing housings, incoming and outgoing tugs, traction handles, etc. It has the advantages of small size, low price, and convenient movement.

Advantages of Rebar Derusting Machine:

The rust removal speed is fast, the effect is good, and the cost of rust removal is low. While removing rust, it can also remove burrs and debris on the surface, which has a certain beautifying effect on the surface. High controllability. Especially for large steel plates, steel bars, steel, steel structure descaling, suitable for large amounts, heavy rust, and steel with fasteners.

Rebar Derusting Machine Operation Process:

1. When in use, place the rebar rust remover on a solid, level surface, and place the carrier in the required length for the material.
2. According to the diameter of the material, adjust the transmission of the inlet and outlet to the center of the shaft. It is advisable to feed in and out a material freely. Lubricate each rotating part of the machine.
3. Adjust the steel brush wheel to be 5-8mm smaller than the diameter of the raw material, so the steel wheel is symmetrical.
4. Put the raw materials neatly on the side of the feed inlet and clean up the site on the side of the discharge.
5. Connect the motor power supply according to the motor requirements. The motor power supply should be fastened to the electrical control box with the specified cable.
6. The motor must rotate according to the marked arrow, synchronize with the feeding port, feed after starting, and enter normal production.

Precautions:

1. The height of the raw material bracket must be consistent with the import and export.
2. Raw materials must be straight.
3. The feeding and discharging drive must be adjusted to be smaller than the diameter of the raw material.
4. The power supply must match the click requirements and be grounded.
5. Every 5 hours of work, check and refuel the transmission bearings.

Our Company

For more than 20 years, we have been specializing in high quality machinery and construction products. Especially in the mining equipment has a wealth of experience, the main products are:

Very large rock separator
Submersible drill
sprayer
Steel bar processing machinery

---

---

About Zhongtuo

Shaanxi Zhongtuo Mining Equipment Co., Ltd. was located in the ancient city of Xi'an in 2005. The company focuses on the production and development of intelligent equipment, focusing on mining equipment, splitting equipment, prestressing equipment, drilling, and rock drilling equipment, shotcrete grouting equipment, and road equipment! The products are used in bridge construction, tunnel subway construction, mining, and hydropower new energy projects.

Zhongtuo business scope covers drilling rigs, bridge tension jacks, diamond saw machines, mud pump machines, mortar spraying machines, dry-mixed shotcrete machines, high-pressure grouting pumps, rebar processing machines, rock splitters, pavement machinery, rescue tools, and so on.

Business Purpose

Shaanxi Zhongtuo Mining Equipment Co., Ltd. was founded with "credibility first, service and thoughtful" as the purpose of the enterprise, the spirit of "honesty, openness, hard work, innovation" spirit of enterprise, adhering to the scientific development, the quality of survival, to serve the credibility of the guiding principles. 

Prospect Future

Become a world-class mine equipment development manufacturer and service provider; "perfect quality, boutique concept, in-depth development, customer first" credo to build the brand and the future; Honesty, seeking economic and social unity, pioneering the development of the times.